Search results for: 'Clogging measuring instruments'
7
Results
in category
Products
Product category
<p>HYDAC offers an extensive array of easy to use measuring systems. Whether it be solid particles or fluid contamination, for sporadic checking or as a permanent installation, under rough field conditions or in the laboratory.</p>The right tool for every application: <ul><li>Portable contamination measurement devices (for recording solid particle contamination and water saturation)</li><li>Stationary contamination measurement devices (for recording solid particle contamination and water saturation)</li><li>Laboratory equipment</li></ul>
Module
<div>The FluidControl Unit FCU 2000 is used as a portable service instrument for the measurement of solid particle contamination in hydraulic and lubrication systems. Die Messwerte werden mittels Infrarot-Technologie erfasst und nach ISO 4406, SAE 4059 und NAS 1638 ausgegeben. For utilisation in hydraulic and lubrication systems, for maintenance, on test benches, for the analysis of both sample bottles and tanks.</div><div><ul><li> Measuring range (calibrated): ISO 12/10/9 ... 23/21/18</li><li> Total flow rate: 50 ... 800 ml/min (depending on the pressure)</li><li> Robust design</li><li> Cleanliness classes in accordance with ISO 4406, SAE 4059 and NAS 1638</li><li> integrated, graphics-capable printer</li><li> Data output in the display or connection to a PC</li><li>RS232 or RS485 interface</li></ul></div>
Module
<div><p>The CSM Economy ContaminationSensor module is a compact and economic online condition monitoring module system. Combined with the fluid sensors available in module format, it measures solid particle contamination and water saturation in hydraulic and lubricating fluids with high proportions of air bubbles.</p><p>Air bubbles are brought into solution by means of an air bubble suppression and are therefore not measured as particles.</p><p>The CSM Economy is the ideal system for counting out the solid particle contamination and water saturation in a fluid, independent of the overall hydraulic system.</p><p>The CSM Economy consists of the base module (motor, pump, air bubble suppression and sensor inline installation) and various sensors.</p></div><div><ul><li>Modular system for tanks and pressure lines in lubrication systems and test benches</li><li>Air bubble suppression</li><li>Economic base module</li><li>Fluid sensors</li></ul></div>
Module
<div><p>The FluidMonitoring Module FMM series combines the ConditionMonitoring products ContaminationSensor CS 1000 and AquaSensor AS 1000 from HYDAC in a single system. It is a robust and stationary system for the user for the online measurement of </p><ul><li> solid particle contamination and</li><li> water saturation (e.g. for the detection of leakages)</li></ul><p> in hydraulic and lubrication fluids. The blocks of the FMM series are equipped with all necessary connections and are thus simple to integrate into existing hydraulic circuits. Types for filter-cooler/heater circuits, pressure and high-pressure applications are available to the user.</p></div><div><ul><li> Cost-optimised installation solution</li><li> Early detection of critical machine statuses</li><li> Continuous monitoring of oil conditions</li><li> Condition-based scheduled maintenance</li></ul></div>
1
Result
in category
Topics & Solutions
More articles on this topic How condition monitoring works: Start video now Reliable, efficient, digital: smart condition monitoring with HYDAC
It puts your hydraulic system and lubrication system at risk! Contamination in your fluids leads to dev ...
0
Result
in category
Downloads
Is your file not listed?
To our download & media center