Search results for: 'Tank and accessories'

<p>Extensive accessories are available for display units. For temperature monitoring, you can choose from probe thermometers, temperature probes and temperature switches. Shut-off elements for rapid maintenance or change without draining the tank and better readability from a distance thanks to additional indicator plates.</p>

<div id="pdb-layout-2-cols"><div id="pdb-content"><div><div><p>As a provider of system solutions, HYDAC supplies all the accessories that are needed for the function, enhancement, retrofitting, equipping, optimisation and maintenance and rapid and conclusive installation of fluid power systems.</p></div><div><p>Scope of delivery:</p><ul><li>Tank (alum.)</li><li>Feet for the tank (alum.)</li><li>End cap seal</li><li>End cap prepared for return line filter, breather filter and bell housing</li><li>Return line filter RF</li><li>Breather filter BFP</li><li>Complete screw set for mounting all supplied components</li></ul><p>Available sizes from 6.5 l to 70 l.</p></div></div></div></div>

The TFP 100 temperature probe was developed primarily for tank installation. The PT 100 – measurement resistor in 4-conductor design can be attached directly to the HYDAC temperature switches ETS 3800, ETS 380 and ETS 1700. As a result of the standardised electrical connections, a linkage with other evaluation and control systems (e.g. PLC) can also be set up without difficulty. For adaptation to different applications and fluids, a nickel-plated brass installation sleeve which is pressure-resistant up to 10 bar is available as an accessory. <ul><li>Version of the measurement switching as four-conductor switching</li><li>Easy to mount</li><li>Can be used universally</li></ul>

HYDAC fluid level sensors with fixed switch points for monitoring the media levels in your tank. One or more switch points can send an electrical signal and be used as a warning message for level regulation. High media-resistance even for challenging fluids. Choose from sizes from 076 to 381 mm and extensive accessories. Available as changeover contact with round plug connector M12. Temperature range of operating fluid -20°C to +95°C – other versions on request. Please ask us for assistance in making your selection.