Search results for: 'OF 5 – Mobile Filtration Unit'

<div>The units of the FluidAqua Mobil FAM 25/45/60/75/95 series works in accordance with the principle of vacuum dewatering for the separation of free and dissolved water and of free and dissolved gases from hydraulic and lubrication fluids. Thanks to the HYDAC bypass filter element technology with high contamination retention capacity and separation capacity, the unit achieves a very high efficiency. All units are equipped with an AquaSensor AS 1000 for continuous monitoring of the water content and control of the unit. A CS 1000 particle sensor for simultaneous monitoring of the solid particle contamination can be integrated as an option. A heater can be optionally integrated or even retrofitted for enhancing the dewatering performance, for highly viscous fluids or with low fluid temperatures. The Siemens S7 series of programmable logic control (PLC) in combination with a Siemens control panel in various languages guarantees simple and reliable operation.</div><div><ul><li> Flow rates (at 50 Hz): up to approx. 95 l/min</li><li> Operating pressure 0 to 4.5 bar</li><li> Extremely low residual water content, gas content and particle contamination in the operating fluids ensure:<br /> - Longer oil change intervals<br /> - Improved component service life<br /> - Greater machine availability<br /> - Reduction in the Life Cycle Cost (LCC)</li></ul></div>

<div><p>The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow. Versions with a motor-pump unit are also available. In the top-loader version, the element is removed “from the top” (no tools required to change the element). The Dimicron elements used exhibit the following properties: </p><ul><li> Particularly high contamination retention capacity</li><li> Environmentally safe disposal (incinerable) and</li><li> water retention (optional: Aquamicron)</li></ul><p> The OLF 5 is used in machine tools, plastic injection moulding machinery, mobile equipment and in wind power applications.</p></div><div><ul><li> Flow rate, hydraulic line: max. 15 l/min<br /> Flow rate, lubrication line: max. 4 l/min</li><li> Operating pressure, hydraulic line: max. 4.5 bar<br /> Operating pressure, lubrication line: max. 3.5 bar</li><li> Improvement of component and filter service life</li><li> Increased machine availability</li><li> Longer oil change intervals</li><li> Minimum space requirement due to compact design</li><li>High level of service-friendliness</li><li>High contamination retention capacity of the elements</li><li> Environmentally friendly disposal of the elements as they can be incinerated</li></ul></div>

<div><p>The OffLine Filter OLFBD is a small, stationary filter unit, without a motor pump assembly, for the fine filtration of hydraulic and lubricating fluids, and removing water from the system.<br />  <br /> The direction of flow through the filter element is freely selectable (from inside to outside or vice versa).<br />  <br /> For use in hydraulic and lubrication systems in industry and mobile hydraulics.</p></div><div><ul><li> Improvement of component and filter service life</li><li> Any direction of flow through the filter element<br /> (from inside to outside or from outside to inside)</li><li> Offline flow is drawn from the cooling-filtration circuit</li><li> The extracted volume is restricted by an orifice in the filter element<br /> (no parts are moved mechanically)</li><li> Flow rate max. 5 l/min, others on request</li></ul></div>