Search results for: 'OF 5 – Mobile Filtration Unit'
3
Results
in category
Products
Module
<div>The units of the FluidAqua Mobil FAM 25/45/60/75/95 series works in accordance with the principle of vacuum dewatering for the separation of free and dissolved water and of free and dissolved gases from hydraulic and lubrication fluids. Thanks to the HYDAC bypass filter element technology with high contamination retention capacity and separation capacity, the unit achieves a very high efficiency. All units are equipped with an AquaSensor AS 1000 for continuous monitoring of the water content and control of the unit. A CS 1000 particle sensor for simultaneous monitoring of the solid particle contamination can be integrated as an option. A heater can be optionally integrated or even retrofitted for enhancing the dewatering performance, for highly viscous fluids or with low fluid temperatures. The Siemens S7 series of programmable logic control (PLC) in combination with a Siemens control panel in various languages guarantees simple and reliable operation.</div><div><ul><li> Flow rates (at 50 Hz): up to approx. 95 l/min</li><li> Operating pressure 0 to 4.5 bar</li><li> Extremely low residual water content, gas content and particle contamination in the operating fluids ensure:<br /> - Longer oil change intervals<br /> - Improved component service life<br /> - Greater machine availability<br /> - Reduction in the Life Cycle Cost (LCC)</li></ul></div>
Product category
<div><p>The compact and stationary fluid conditioning units of the OLF 5 are used for the fine filtration of hydraulic and lubrication oils in bypass flow. Versions with a motor-pump unit are also available. In the top-loader version, the element is removed “from the top” (no tools required to change the element). The Dimicron elements used exhibit the following properties: </p><ul><li> Particularly high contamination retention capacity</li><li> Environmentally safe disposal (incinerable) and</li><li> water retention (optional: Aquamicron)</li></ul><p> The OLF 5 is used in machine tools, plastic injection moulding machinery, mobile equipment and in wind power applications.</p></div><div><ul><li> Flow rate, hydraulic line: max. 15 l/min<br /> Flow rate, lubrication line: max. 4 l/min</li><li> Operating pressure, hydraulic line: max. 4.5 bar<br /> Operating pressure, lubrication line: max. 3.5 bar</li><li> Improvement of component and filter service life</li><li> Increased machine availability</li><li> Longer oil change intervals</li><li> Minimum space requirement due to compact design</li><li>High level of service-friendliness</li><li>High contamination retention capacity of the elements</li><li> Environmentally friendly disposal of the elements as they can be incinerated</li></ul></div>
Product category
<div><p>The OffLine Filter OLFBD is a small, stationary filter unit, without a motor pump assembly, for the fine filtration of hydraulic and lubricating fluids, and removing water from the system.<br /> <br /> The direction of flow through the filter element is freely selectable (from inside to outside or vice versa).<br /> <br /> For use in hydraulic and lubrication systems in industry and mobile hydraulics.</p></div><div><ul><li> Improvement of component and filter service life</li><li> Any direction of flow through the filter element<br /> (from inside to outside or from outside to inside)</li><li> Offline flow is drawn from the cooling-filtration circuit</li><li> The extracted volume is restricted by an orifice in the filter element<br /> (no parts are moved mechanically)</li><li> Flow rate max. 5 l/min, others on request</li></ul></div>
14
Results
in category
Topics & Solutions
Explore more magazine articles Laser welding fume filtration for additive manufacturing methods HYDAC – your partner for welding fume filtration in additive manufacturing, especially with SLM technology.Selective laser melting (SLM) is an additive ...
Explore more magazine articles Climate change is causing an increasing number of heatwaves worldwide, with severe health and economic consequences. On these hot days, things are particularly difficult for manufacturing companies. Not only do the wor ...
Modern automation solutions and high productivity combined with energy- and cost-efficiency – machine builders in the machine tool industry are being confronted with increasingly complex requirements from customers and from the end user side. HYDAC i ...
Explore more magazine articles When residual materials and waste materials are recycled or further processed, it's not only our environment that benefits. With briquetting presses, a wide variety of waste materials generated in production processes, ...
Explore more magazine articles Built with robust HYDAC components from current production in industrial-grade design, the hydraulic trainer HHT2 is an integrated all-inclusive strategy for the topic of hydraulics – with a wide range of options and ...
Explore more magazine articles In every existing tank system, we see potential for optimising and reducing the size of tanks. Optimising of tank size by 30–40% Cost reduction by reducing complexity and material use CO2 reduction More reliable ma ...
Electric machinery and vehicles Although most people think of electromobility as relating solely to electric cars, there are many other promising applications with great electrification potential.
This includes a great number of commercial vehicles ...
Explore more magazine articles Groaning metal and crunching glass: scrap baling presses apply tremendous forces. That’s how the strongest metal scrap turns into a small compact cube. The hydraulic device enables a significant reduction in volume or ...
0
Result
in category
Downloads
Is your file not listed?
To our download & media center