United States
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC
Request a Quote
A screw-in cartridge, solenoid operated, 2 way, 2 position, normally closed, pilot operated, poppet type intended for use as a unidirectional blocking or load holding device in hydraulic circuits requiring low internal leakage.
Unit of Measure

Specifications

Type

 N/A Screw-In Cartridge Solenoid Operated Valve

Style

 N/A Poppet

Model Code Description

 N/A WS06Z-01M-C-N-0

Flow Direction

 N/A 2-Way, 2 Position, Normally Closed

Valve Operator

 N/A Pilot

Operating Pressure

 N/A 350 bar5000 psi

Nominal Flow

 N/A 3.5 gpm13.3 L/min

Internal Leakage

 N/A Leak tight, less than 5 drops/min. at 5000 psi (350 bar)

Minimum Fluid Operating Temperature

 N/A -20 ºF-29 ºC

Maximum Fluid Operating Temperature

 N/A 248 ºF120 ºC

Ambient Temperature [Min]

 N/A -20 ºF-29 ºC

Ambient Temperature [Max]

 N/A 140 ºF60 ºC

Continuous Coil Duty Rating of Nominal Voltage

 N/A 85 to 115 %

Current Draw at 12 Direct Current (DC) Voltage and 68 ºF (20 ºC)

 N/A 984 mA

Current Draw at 24 Direct Current (DC) Voltage and 68 ºF (20 ºC)

 N/A 492 mA

Pull-In Current to Operate Valve [Min] (Nominal Amperage)

 N/A 70 %

Energized Typical Response Time (Varies with Pressure and Flow)

 N/A 35 ms

De-Energized Typical Response Time (Varies with Pressure and Flow)

 N/A 50 ms

Fluid Compatibility

 N/A Mineral-Based or Synthetics with Lubricating Properties

Viscosity

 N/A 7.4 to 420 cSt50 to 2000 SUS

Filtration

 N/A 21/19/16 or Cleaner (per ISO 4406)

Installation

 N/A No Orientation Restrictions

Cavity

 N/A FC06-2

Cavity Tools (Rougher)

 N/A 02582046

Cavity Tools (Finisher)

 N/A 02582047

Cartridge Weight

 N/A 2.7 oz75 g

Coil Weight

 N/A 3.1 oz88 g

Cartridge Material

 N/A Steel

Work Surface

 N/A Hardened

Exposed Surface

 N/A Zinc Plated

O-Ring Material

 N/A Buna-N or Viton®

Back-Up Ring Material

 N/A Solid Thermoplastic Polyester

Coil Material

 N/A Class N

Wire

 N/A 200 ºC High Temperature Magnet

Shell

 N/A Steel

Encapsulation

 N/A Polyester

Seals

 N/A Buna-N

Seal Kit

 N/A FS062-N - P/N: 02610184

Override Option

 N/A Screw Type Manual Override

Ports

 N/A Cartridge Only

Coil Voltage Type

 N/A Without Coil

Division

 N/A 15

BUn

 N/A EA

Overview

N/A Poppet type valves are intended for use as load holding and blocking devices in hydraulic circuits requiring very low internal leakage. HYDAC offers a variety of Poppet type two-way and three-way normally closed or normally open unidirectional or bi-directional load holding and blocking valves. Models are available for flows up to 40 gpm (150 l/min) with pressure ratings up to 5000 psi (350 bar).

All HYDAC poppet valves are tested on an automated test stand measuring internal leakage by monitoring pressure decay, not counting drops per minute. HYDAC Poppet valves therefore provide reliable load holding and assure minimum pressure decay at the actuator.

Operation

N/A When de-energized the WS06Z blocks flow from port 2 to port 1, while allowing flow from port 1 to port 2. When energized the poppet lifts and opens the flow from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.

Note

N/A All measurements are subject to technical modifications.