United States
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC
Request a Quote
A screw-in cartridge, solenoid operated, 2 way, 2 position, normally closed, pilot operated, poppet type intended for use as a unidirectional blocking or load holding device in hydraulic circuits requiring low internal leakage.
Unit of Measure

Specifications

Type

 N/A Screw-In Cartridge Solenoid Operated Valve

Style

 N/A Poppet

Model Code Description

 N/A WS10Z-01-C-V-0 Without Coil

Flow Direction

 N/A 2-Way, 2 Position, Normally Closed

Valve Operator

 N/A Pilot

Operating Pressure

 N/A 350 bar5000 psi

Nominal Flow

 N/A 20 gpm75 L/min

Internal Leakage

 N/A Leak tight, less than 5 drops/min. at 5000 psi (350 bar)

Minimum Fluid Operating Temperature

 N/A -4 ºF-20 ºC

Maximum Fluid Operating Temperature

 N/A 248 ºF120 ºC

Ambient Temperature [Min]

 N/A -4 ºF-20 ºC

Ambient Temperature [Max]

 N/A 140 ºF60 ºC

Continuous Coil Duty Rating of Nominal Voltage

 N/A 85 to 115 %

Current Draw at 12 Direct Current (DC) Voltage and 68 ºF (20 ºC)

 N/A 1.5 A

Current Draw at 24 Direct Current (DC) Voltage and 68 ºF (20 ºC)

 N/A 0.8 A

Pull-In Current [Min] of Nominal at 5000 psi (350 bar)

 N/A 85 %

Energized Typical Response Time

 N/A 30 ms

De-Energized Typical Response Time

 N/A 60 ms

Fluid Compatibility

 N/A Mineral-Based or Synthetics with Lubricating Properties

Viscosity

 N/A 7.4 to 420 cSt50 to 2000 SUS

Filtration

 N/A 21/19/16 or Cleaner (per ISO 4406)

Installation

 N/A No Orientation Restrictions

Cavity

 N/A FC10-2

Cavity Tools (Rougher)

 N/A 02580274

Cavity Tools (Finisher)

 N/A 02580247

Cartridge Weight

 N/A 0.40 lb0.182 kg

Coil Weight

 N/A 0.42 lb0.190 kg

Cartridge Material

 N/A Steel

Work Surface

 N/A Hardened

Exposed Surface

 N/A Zinc Plated

O-Ring Material

 N/A Buna-N or Viton®

Back-Up Ring Material

 N/A Solid Thermoplastic Polyester

Coil Material

 N/A Class N

Wire

 N/A High Temperature Magnet

Shell

 N/A Steel

Encapsulation

 N/A Polyamide

Seals

 N/A Viton®

Seal Kit

 N/A FS102-V - P/N: 03051757

Override Option

 N/A No Manual Override

Ports

 N/A Cartridge Only

Coil Voltage Type

 N/A Without Coil

Division

 N/A 15

BUn

 N/A EA

Overview

N/A Poppet type valves are intended for use as load holding and blocking devices in hydraulic circuits requiring very low internal leakage. HYDAC offers a variety of Poppet type two-way and three-way normally closed or normally open unidirectional or bi-directional load holding and blocking valves. Models are available for flows up to 40 gpm (150 l/min) with pressure ratings up to 5000 psi (350 bar).

All HYDAC poppet valves are tested on an automated test stand measuring internal leakage by monitoring pressure decay, not counting drops per minute. HYDAC Poppet valves therefore provide reliable load holding and assure minimum pressure decay at the actuator.

Features

N/A

  • Screw type manual override option
  • Leak tight design
  • Low pressure drop
  • Wet armature construction
  • Standard Water/Weather resistant coils rated up to IP69K
  • Wide voltage range
  • Coils are rated for continuous duty operation
  • Wide variety of voltages and molded-in connectors
  • Cartridges are voltage interchangeable
  • Manual overrides available on all models
  • Hardened poppet to ensure minimal wear and extend service life
  • One piece body design minimizes the effects of eccentricity
  • All exposed cartridge surfaces are zinc-plated to resist corrosion
  • Industry common cavity-compact size

Operation

N/A When de-energized the WS06Z blocks flow from port 2 to port 1, while allowing flow from port 1 to port 2. When energized the poppet lifts and opens the flow from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.

Note

N/A All measurements are subject to technical modifications.