United States
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC
Request a Quote
HAT 1400 is an absolute measuring single turn angle sensor.

Thanks to its non-contact magnetic measuring method and its robust design, the HAT 1400 is ideally suited for the measurement of the rotational angle in mobile machines.

Due to its two-chamber design, the electronic unit is completely encapsulated which means it meets IP 6K9K if the electrical connection is carried out accordingly.
Unit of Measure

Specifications

Type

 N/A Angle Sensor

Model Code Description

 N/A HAT 1436-F12-360R-P01-V106_M01-000

Measuring Range

 N/A 0 to 360 º

Direction of Rotation

 N/A No Orientation Restrictions

Mounting Type

 N/A Solid Shaft, Length 10 mm, Diameter 6 mm

Operating Temperature [Min]

 N/A -40 ºC

Operating Temperature [Max]

 N/A 85 ºC

Speed [Max]

 N/A 17000 rpm

Max. Axial Load

 N/A 60 N

Max. Radial Load

 N/A 100 N

Output Type

 N/A J1939

Resolution

 N/A 14 Bit

Housing Material

 N/A Stainless Steel

Shaft Material

 N/A Stainless Steel

Accuracy (At Room Temperature)

 N/A ± 0.1º Typical, ± 0.2º Max.

Accuracy (Over the Temperature Range)

 N/A ± 0.05º / 10 K Typical, ± 0.1º / 10 K Max.

Repeatability

 N/A ≤ ± 0.05 º

Characteristic Curve

 N/A Linear, CW

E13 Mark

 N/A E13*10R00*10R05*14136*00

Vibration Resistance According to DIN EN 60068-2-6: 2010

 N/A 7.5 mm (5 Hz ≤ f < 8.2 Hz), 2 g (8.2 Hz ≤ f < 2000 Hz)

Shock Resistance According to DIN EN 60068-2-27: 2011

 N/A 20 g (11 ms in 3 Axes)

Sensor Type

 N/A Single Turn Angle Sensor

Degree of Protection

 N/A IP 67, IP 6K9K (Electronics)

Storage Temperature Range

 N/A -40 to 85 ºC

Industry Standards/Certifications

 N/A European Standard (EN) 61000-6-1 / 2 / 3 / 4

Power Supply

 N/A 9 to 36 V DC

Residual Ripple of Supply Voltage

 N/A ≤ 5%

Weight

 N/A 0.264 lb

Power Consumption

 N/A 1.4 W

Life Expectancy

 N/A 1.5 * 109 Rotations at 3000 rpm

Electrical Connection

 N/A Male M12 x 1, 5 Pole

Pin Connection 1

 N/A Not Connected

Pin Connection 2

 N/A +UB

Pin Connection 3

 N/A 0V

Pin Connection 4

 N/A CAN High

Pin Connection 5

 N/A CAN Low

Note

N/A Reverse polarity protection of the supply voltage, overvoltage, override and short circuit protection are provided.

Additional Information

N/A In the CANopen version, the measured signal is digitised and made available to the CAN field bus system via the CANopen protocol. The instrument parameters can be viewed and configured by the user via the CANopen object directory using standard CAN software.

The sensor is therefore suitable for a large variety of applications in the automobile industry and in mobile work machines.

Especially for the use in public traffic vehicles, HAT 1400 has E13 approval (approved for road vehicles) in accordance with ECE type approval.